
Reliability & Maintenance Engineer, FC
Amazon · Posted 1 month ago
- Bengaluru, Karnataka, India (On-site)
- Full-time
About the role
Description
Key Responsibilities
- Execute planned preventive maintenance (PPM) schedules for all refrigeration systems, including tropical rooms, chilled rooms, and frozen rooms.
- Monitor and maintain optimal temperature parameters across all cold chain zones in strict accordance with defined Standard Operating Procedures (SOPs).
- Conduct routine inspections of compressors, condensers, evaporators, expansion valves, and refrigerant piping systems.
- Ensure refrigerant levels are maintained within specified limits and perform periodic leak detection tests.
- Monitor and maintain defrost cycles, drain lines, and insulation integrity of all cold rooms.
- Coordinate with Original Equipment Manufacturers (OEMs) and third-party service providers for specialized repairs and annual maintenance contracts.
- Diagnose and resolve refrigeration system faults, including compressor failures, refrigerant leaks, thermostat malfunctions, and evaporator icing.
- Respond to temperature excursion alarms and execute corrective actions within defined response timelines.
- Troubleshoot electrical and control system faults in refrigeration panels, PLCs, and Building Management System (BMS) interfaces.
- Perform root cause identification for recurring equipment failures and implements verified permanent fixes.
- Maintain and monitor Diesel Generator (DG) sets, including fuel systems, coolant levels, battery health, and periodic load bank testing.
- Execute preventive and predictive maintenance on Uninterruptible Power Supply (UPS) systems, including battery health checks, load testing, and firmware updates.
- Monitor and maintain electrical panels — including Main Distribution Boards (MDB), Sub-Distribution Boards (SDB), Automatic Transfer Switches (ATS), and change-over panels.
- Conduct periodic insulation resistance (IR) testing, earth resistance testing, and thermography surveys of all electrical systems.
- Ensure full compliance with applicable electrical safety standards and statutory requirements.
- Monitor real-time equipment parameters through the BMS, temperature monitoring systems, and energy meters.
- Conduct daily walkthroughs to identify abnormalities, unusual sounds, vibrations, or visual defects in equipment.
- Track and maintain equipment runtime hours, energy consumption data, and performance trends.
- Ensure all monitoring sensors and alarm systems are calibrated and fully functional at all times.
- Daily Reports — Prepare and submit daily equipment status reports covering temperature logs, DG runtime, UPS status, and all observed anomalies.
- Weekly Reports — Compile weekly maintenance summary reports covering PPM compliance, breakdown analysis, spare parts consumption, and pending work orders.
- Monthly Reports — Develop monthly performance reports inclusive of equipment uptime percentage, Mean Time Between Failures (MTBF), Mean Time To Repair (MTTR), energy consumption trends, and cost analysis.
- Conduct structured Root Cause Analysis (RCA) for all equipment breakdowns, temperature excursions, and safety incidents using methodologies such as Five-Why Analysis and Fishbone Diagrams.
- Develop and implement Corrective and Preventive Actions (CAPA) with clearly defined timelines, responsible owners, and effectiveness verification criteria.
- Maintain a CAPA tracker with closure status, evidence of implementation, and effectiveness validation records.
- Present RCA and CAPA findings during Weekly Business Reviews (WBR) and Monthly Business Reviews (MBR).
- Qualifications & Skills
- Taking care of Soft services activities i.e. Pest control, Housekeeping, Scrap & Garbage disposal.
- Handling agency staff & overall shift.
- Education — Diploma or bachelor’s degree in mechanical engineering, Electrical Engineering, or Refrigeration & Air Conditioning.
- Experience — Minimum three to five years of hands-on experience in refrigeration systems and base building equipment maintenance.
- Technical Knowledge — Proficiency in refrigeration cycles, electrical systems, DG operations, UPS systems, and BMS platforms.
- Certifications — Preferred certifications in Refrigeration & Air Conditioning, Electrical Safety, or equivalent recognised standards.
- Analytical Skills — Ability to perform structured RCA, develop CAPA plans, and apply data-driven decision-making.
- Reporting Skills — Proficiency in preparing technical reports, dashboards, and MIS outputs using MS Excel and relevant tools.
- Communication — Clear verbal and written communication skills for effective cross-functional coordination.
Working Conditions
- Shift-based operations with rotational shifts as applicable to site requirements.
- Sustained exposure to cold room environments, including frozen rooms operating at sub-zero temperatures.
- Regular work in proximity to live electrical systems — adherence to all safety protocols is mandatory.
- On-call availability required for emergency breakdowns and critical temperature excursion response.
Basic Qualifications
- Experience in Electrical/Mechanical/Electronics and Communication/Instrumentation and Controls
- Experience in handling Cooling systems/Chiller/Cold storage for minimum 2years
Preferred Qualifications
- 1+ years of conveyors/automation/control systems maintenance experience
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.
Company - ASSPL - Karnataka - B56
Job ID: A10563572
Skills
Quark9 guide
How to land this Reliability & Maintenance Engineer, FC role
Our notes for applicants, based on how software engineering hiring usually works and on 7 similar open jobs on Quark9.
Resume checklist for this job
Most companies screen resumes with an ATS before a person reads them. Make sure each skill you genuinely have appears in your resume in the same words the job uses.
Must have
- Refrigeration & Air Conditioning
- Electrical Engineering
- Mechanical Engineering
- Maintenance
- Root Cause Analysis (RCA)
- Corrective and Preventive Actions (CAPA)
- Write each bullet as action plus result: "Cut p95 latency from 800 ms to 200 ms by adding Redis caching"
- Keep a skills line that matches the job's stack word for word, so ATS filters pick it up
- Put your strongest one or two projects first, with links to code or the live product
How software engineering interviews usually run
- An online coding test or a recruiter screen on your stack and projects
- One or two technical rounds on data structures, problem solving and your core language
- A system design or low-level design round for mid and senior roles
- A hiring manager round on ownership, teamwork and how you handle production issues
Questions worth preparing
- Design a URL shortener. How would you scale reads, and where would you cache?
- Find the first non-repeating character in a string. What is the time complexity?
- Explain how you would debug an API that became slow after a release.
- Describe the hardest bug you fixed and how you found it.
Every company runs its own process, so treat this as a likely shape, not a promise. Practise a mock interview on Quark9 and get scored feedback before the real one.
The market for Reliability & Maintenance roles right now
- Most openings are in Delhi, Panipat, Phaltan, Gurgaon.
- The skills these jobs ask for most:
From open jobs on Quark9 matching “Reliability & Maintenance”, updated every few minutes.
Similar jobs
- Reliability & Maintenance Engineer, RME CoordinatorAmazon · Delhi, Delhi, India (On-site)
- Reliability & Maintenance Engineer, INQCAmazon · Delhi, Delhi, India (On-site)
- Maintenance Engineer-Mechanical (Maintenance Engineer-Mechanical)Air Liquide · Panipat, Haryana, India (On-site)
- Maintenance ManagerCummins India · Phaltan, Maharashtra, India (On-site)
- Reliability & Maintenance EngineerAmazon · Gurgaon, Haryana, India (On-site)